top of page

Home › Landscape Lighting › Sachse

SACHSE, TEXAS

Landscape Lighting in Sachse, TX


Landscape lighting for Sachse homes, HOA entrances and local businesses. Warm low-voltage LED that adds curb appeal, safety and evening use of the yard.


✓ Design to service    ✓ Homes and businesses    ✓ Insured, COIs available

Low-voltage landscape lighting on a home and yard at night
Low-voltage landscape lighting on a home and yard at night
Low-voltage landscape lighting on a home and yard at night

QUICK ANSWER

Christmas Decor by Carruthers Decorative Lighting designs and installs low-voltage LED landscape lighting in Sachse, TX. We light front walks, facades, trees, patios, HOA monuments and business signs, aim every fixture after dark and offer service visits. Call 972-620-9560, Monday to Friday from 8am to 5pm.

Since 1978

Dallas family business

5+ years in lighting

Commercial and large residential lighting

Fully insured

Liability and workers’ comp

4.5★ Google

Rated by DFW clients

Where the Light Goes

Every system is low-voltage LED, sold and installed under NTD (Nite Time Decor), our landscape lighting line.

01

Architectural accents

Grazing a stone wall or washing a two-story entry shows off the materials the builder chose. We balance brightness so the front door stays the clear destination.

04

Outdoor rooms

Kitchens, fire pits and covered patios get task light where you cook and low, warm light where you sit, so evenings outside in Sachse last longer.

02

Walkways and steps

We light the routes people actually walk: drive to door, patio to pool, gate to back yard. Fixture spacing keeps footing clear and avoids the airport look.

05

Safer dark corners

We find the spots your porch light misses: the side of the garage, the back fence line and the steps off the patio, and put soft, steady light there.

03

HOA entrances and monuments

Neighborhood entry walls, stone monuments and median plantings need even, reliable light. We design for the board's look, keep fixtures low and sturdy and set them on a reliable dusk schedule.

06

Design built for your lot

We sketch where every fixture, cable run and transformer goes, so you know what the finished Sachse property will look like before a single trench is cut.

Low-voltage landscape lighting on a home and yard at night

Fixtures, Materials and Color


Fixture choice shapes how a system looks and how long it holds up. Brass and copper fixtures weather to a dark finish and shrug off sprinklers and lawn equipment; aluminum is lighter and lower in cost.


Color temperature matters as much as brightness. Warm white, around 2700K, flatters brick, stone and foliage and feels like a porch light. Cooler whites can look harsh on a Sachse home, so we use them sparingly, mostly on blue-green plants or water.


  • Brass, copper or aluminum fixture bodies

  • Warm white near 2700K for most homes

  • Spot, wash, path, well and hardscape types

  • Beam spread matched to each target


From First Call to First Night

01

Tell us the goal

Curb appeal, safety, ausable patio or all three. Your priorities decide where light goes first and what can wait.

02

Design the scene

We pick focal points like a tree, entry or wall, then layer path, accent and security light around them.

03

Proposal

A written proposal lists zones, fixture counts and materials. Options are laid out so you can scale the first phase up or down.

04

Installation day

Fixtures go in, cable is buried shallow and connections are sealed. Many home installs wrap up in a day or two.

05

Aim after dark

We return at night to fine-tune aim and brightness, set the timer or app schedule and walk you through it.

Lighting Sachse Neighborhoods


Sachse sits between Garland, Wylie and Murphy, with mostly newer neighborhoods, many of them with HOA entrances and amenity centers. Homes tend to have brick and stone facades and landscaping that is still filling in. That makes the facade, entry and back yard the natural places to start.

Newer neighborhoods

Many Sachse homes have stone and brick elevations with young trees. Facade wash, a lit entry and path light deliver curb appeal right away, with room to add tree lights later. Cable runs and transformer capacity are planned up front, so new fixtures can join the system later.

PGBT and SH 78

Businesses near the President George Bush Turnpike and SH 78 benefit from lit signs and entry beds, scheduled to run on their own every evening. Durable fixtures and sealed connections hold up to heat, wind and storms, and a photocell means no one has to switch the lights on.

HOA entrances

Community entry monuments and median plantings along Sachse's main roads look their sharpest with even, reliable light that comes on at dusk every night. Fixtures are set low and shielded so drivers see the lettering and plantings rather than bright points of light, and the board gets a written proposal first.

Back yards and patios

Sachse back yards often have covered patios and young fence-line trees. Patio downlights and a few accent fixtures make evenings outside more comfortable. A separate zone for the patio lets you switch off seating-area light while path and security lights keep running all night long.

Light That Makes a Property Feel Safer


Good landscape lighting is quiet security. Instead of one harsh floodlight, we spread softer light across entries, side yards, gates, drives and the back fence line so there are fewer dark spots to hide in.


Steady, even light also helps doorbell and security cameras capture faces and plates. It keeps steps and walks safe for family and guests coming home late. For Sachse homes and businesses alike, it does all that while still looking intentional from the street.


  • Fewer dark corners and hiding spots

  • Better images for security cameras

  • Safe footing on steps and walks

  • Softer than a single floodlight


Low-voltage landscape lighting on a home and yard at night

What Drives Project Price

Scope, materials and site conditions decide cost more than anything else.

Number of fixtures

Fixture count is the biggest single driver. Lighting the front walk and two trees is a small project; wrapping the whole lot with path, accent and patio light is several times larger.

Fixture quality

Solid brass and copper last longer outdoors than painted aluminum but cost more at the start. We match material to how exposed each fixture will be.

Timer, photocell or app

A basic photocell and timer is the most economical. App control and separate zones cost more but let you schedule trees, paths and patio independently.

Ground and hardscape

Soft beds are quick to work in. Clay, rock, heavy roots, driveways and stone walls slow the crew down and change the cost of running cable.

Commercial requirements

Larger sites need tougher fixtures, longer runs and crews scheduled around customers, tenants or residents. Certificates of insurance are part of the package for property managers and boards.

What DFW clients say

4.5-star average on Google from clients across Dallas-Fort Worth.

★★★★★

“Fast and courteous office staff and installers. Abraham my installer was excellent!”

robert simmons

★★★★★

“This is the first year I have used this company, & I can say I am absolutely pleased! The designer and I agreed on the overall design, and the team executed it properly. Any issues that have arisen since install, they have been very prompt in their…”

Ellen Sterin

★★★★★

“These guys were amazing. Highly recommend them for all your decorative lighting needs.”

Alex Shaw

Sachse Landscape Lighting FAQ


Have a question we didn’t cover? Call 972-620-9560 or request a free quote online.

How is a landscape lighting project priced?

–

We price from the property, not a package. Fixture count drives most of the cost, followed by materials, transformer size, cable distance and installation conditions like rock or hardscape. After a site visit you get a written proposal with those factors laid out, and you can scale the first phase to fit your plans.

Can you light a newer Sachse home with small trees?

–

Yes. The design leans on the facade, entry, walk and patio, which look good on day one. We size the transformer with room to spare and plan cable runs so tree lights can be added as your landscaping grows. Warm light makes a new home feel settled.

Is landscape lighting a shock hazard?

–

Low-voltage systems are designed to minimize that risk. The transformer converts household current to roughly 12 volts, the cable is shallow and sealed connectors keep moisture out. It is a much safer choice for yards with children, pets, sprinklers and frequent gardening than line-voltage outdoor wiring.

How long does installation take?

–

Many residential systems are installed in a day or two once the design is approved. Larger estates, commercial grounds and projects that cross hardscape take longer. We return after dark to fine-tune aim and brightness, so plan on one evening visit after the main installation day.

Do I need HOA approval for landscape lighting?

–

Some Sachse neighborhoods require architectural approval for exterior changes, and some limit glare or fixture types. Check your HOA's guidelines before installation. We can provide a layout and fixture details for your application and design the system to keep light on your property.

Do you work with Sachse HOA boards?

–

Yes. We light HOA entrance monuments, median plantings and amenity areas. Boards get one written proposal explaining each cost factor and an insured crew, with certificates of insurance available for the management company. Phasing across several entrances is an option when budgets are tight.

Is it expensive to run landscape lights every night?

–

No. LED fixtures use only a few watts each, so even a large system costs little to run from dusk until late evening. Timers and app schedules let you shut accent lights off at a set hour to use even less.

How many fixtures does a front yard need?

–

It depends on the size of the house, the number of trees and how much you want lit. A modest front yard might need a dozen or fewer fixtures; a large lot with mature trees and a long walk needs more. We design to the property rather than a set count.

Do you service the system after installation?

–

Yes. We provide service calls on systems we install: re-aiming fixtures as trees and shrubs fill in, cleaning lenses, replacing failed parts and updating timers or app schedules. Call the office at 972-620-9560 during business hours to set one up.

Plan Your Sachse Lighting

Call 972-620-9560 on a weekday between 8am and 5pm, and we will set up a site visit.

bottom of page