Home › Landscape Lighting › Garland
GARLAND, TEXAS
Landscape Lighting in Garland, TX
Garland runs from a historic downtown square to the shores of Lake Ray Hubbard. We design low-voltage LED landscape lighting for its homes, lake properties and businesses.
✓ Homes, lake lots, businesses ✓ Warm white LED ✓ Service after install



QUICK ANSWER
Garland landscape lighting is a low-voltage LED system built for your property: uplit trees, lit walks, facade washes, patio and shoreline light, and security lighting. Businesses get sign, entry and parking-edge lighting. We visit, design, install with shallow cable and stay available for service calls after the system is in.
Since 1978
Dallas family business
5+ years in lighting
Commercial and large residential lighting
Fully insured
Liability and workers’ comp
4.5★ Google
Rated by DFW clients
What We Light in Garland
Six features Garland owners ask about most.
01
Canopy and Moonlighting
Soft downlights mounted high in mature trees let light filter through the leaves onto lawn and walks below. It reads like moonlight and keeps big yards from going black at night.
04
Patios and Outdoor Living
Downlights in pergolas, step lights on decks and soft accents around seating let you use the patio, pool deck or outdoor kitchen long after sunset through the warm months.
02
Lakeside Backyards
Homes near Lake Ray Hubbard face the water. Path light to the shore, soft accents on shoreline trees and patio lighting make the most of the view without throwing glare onto the lake.
05
Ranch-Style Fronts
Many Garland homes are long, low brick ranches. Grazing light along the front and focused light at the entry give them presence at night without needing many fixtures.
03
Path and Walkway Lights
Low path fixtures mark the route from driveway to front door, along garden beds and out to the back gate. Guests see every step and edge without bright spots in their eyes.
06
Commercial Grounds
Office campuses, retail centers, restaurants and HOA entrances get the same design approach at a larger scale: signage, entries, parking edges, specimen trees and monument walls.

Lighting by the Water
Lake views are worth lighting around, not over. Bright fixtures facing the lake create glare on the water and make it hard to see out.
We keep shoreline lighting low and warm, aim fixtures toward trees and paths rather than the water, and use shields to cut reflections. Path and step lights make the walk to the shore safe, and the lake stays dark enough to enjoy from the patio.
Low, warm shoreline accents
Fixtures aimed away from the water
Path and step lights to the shore
Shields that cut reflections
Our Five-Step Install
01
Start With a Call
Tell us about the property, the trees and the spaces you use at night. We book a visit that fits your schedule in Garland.
02
Walk the Grounds
We look at trees, beds, walls, walks and the house itself, and note where you sit, park and enter after dark.
03
Pick the Fixtures
Uplights, path lights, washes and downlights are matched to each feature, with warm white color chosen to suit the stone and plants.
04
Clean Install
The crew tucks wire under turf and mulch, protects roots and sprinklers, and leaves beds looking the way they did that morning.
05
Night Check
After dusk we fine-tune angles and brightness so nothing glares, then hand over timer or app control before we leave.
Lighting Around Garland
Garland covers a lot of ground in northeast Dallas County. A few areas where our designs often focus:
Downtown Garland
Shops, restaurants and offices around the downtown square see evening visitors for events and dining. Lit entries, planters and trees help businesses stand out and make the square feel welcoming after dark. Nearby homes with porches and older trees get warm accents that suit the area's character.
Lake Ray Hubbard Shoreline
Lakeside homes on Garland's east side center on the water. Shoreline trees, dock paths and patios are lit low and warm so the view stays clear and the walk to the water is safe. Dock and stair lighting also makes late returns from the water much safer.
LBJ Freeway Corridor
Industrial, office and retail properties along I-635 need visible signage and safe parking areas. We light signs, entry plantings and parking edges with commercial-grade fixtures on reliable schedules. Lit walks and parking edges help employees on evening shifts feel safer heading to their cars.
Firewheel
Homes around Firewheel Golf Park and businesses near Firewheel Town Center sit in Garland's north end. Golf course backyards get rear facade and patio lighting, while retail frontage gets signs, trees and walks. Fixtures facing the golf course are shielded so golfers and neighbors do not see glare.
Duck Creek Greenbelt
Homes near the Duck Creek greenbelt back onto trees and trails. Soft, shielded fixtures keep light on the property and create a gentle backyard glow without reaching into the greenbelt. Lit backyard edges make it easier to see kids and pets from inside the house.
Lighting for Garland Businesses
Garland has a large commercial and industrial base, along with neighborhood retail and restaurants. Their grounds need to look cared for and feel safe after dark.
We light monument signs, entry trees, planted islands and walkways, then schedule the system around business hours. Our landscape lighting line, NTD, or Nite Time Decor, serves commercial properties as well as homes, with fixtures placed out of the way of maintenance crews and certificates of insurance on request.
Monument and building signs
Entry trees and planted islands
Walkways and parking edges
Certificates of insurance on request

Pricing Comes Down to These
Cost is set by scope, and these are the pieces that make up the scope.
How much you light
Lighting only the street-facing view keeps a project tight. Adding the backyard, patio, side gates and every specimen tree grows the fixture list, the wire and the crew time together.
Wire runs and distance
Long runs to a back fence line, a far tree or a detached structure add cable and labor. Grouping fixtures into smart circuits keeps wire lengths and voltage drop under control.
Tree height and mounting
Uplighting from the ground is straightforward. Mounting downlights high in a tall oak for a moonlight effect takes climbing, careful strapping and more time on site.
Crossing paving and stone
Turf and planting beds are quick to work in. Getting under concrete walks, flagstone patios or brick edging, or setting lights into walls and steps, adds labor that we flag early.
Zones and app control
Splitting front, back and patio into separate zones lets you run each on its own schedule. Smart controllers and app access add to the hardware list and the setup work.
What DFW clients say
4.5-star average on Google from clients across Dallas-Fort Worth.
★★★★★
“These guys were amazing. Highly recommend them for all your decorative lighting needs.”
Alex Shaw
★★★★★
“First season with them and hands down best service I’ve had. Very impressed with their service and communication. David was very professional and made the entire experience easy and worry free. Will definitely be keeping my business with them!”
Courtney Carrier
★★★★★
“Fast and courteous office staff and installers. Abraham my installer was excellent!”
robert simmons
Garland Landscape Lighting FAQ
Have a question we didn’t cover? Call 972-620-9560 or request a free quote online.
Can you light my backyard on Lake Ray Hubbard?
–
Yes. We light shoreline trees, paths and steps to the water and the patio, keeping fixtures low and aimed away from the lake so there is no glare on the water. The result is a safe walk to the shore and a clear view from the house.
Do you light businesses in Garland?
–
Yes. We light signs, entries, trees, planted islands and walkways for offices, industrial sites, retail and restaurants in Garland. Schedules are matched to your hours, and certificates of insurance are available for property managers. Fixtures are placed to stay clear of mowers and maintenance crews.
How many fixtures does a Garland ranch home need?
–
It depends on the lot and trees, but long ranch fronts often look great with a modest number of fixtures: grazing light across the brick, focused light at the entry and a couple of uplit trees. We design for effect, not a fixture count.
How is a landscape lighting project priced?
–
We price from the site, not a menu. The proposal is built from how many fixtures the design needs, what they are made of, how far the wire runs, whether we cross paving, and whether you want a simple timer or app control with zones. Many owners start with the front yard and add the back later.
What is the difference between low-voltage and line-voltage lighting?
–
Line voltage runs at full household current and needs conduit, deep trenching and an electrician for every change. Low voltage, usually around 12 volts, runs through a transformer, so cable can sit shallow and fixtures are easy to move as the landscape grows. For homes and most commercial grounds, low voltage is the practical choice.
Do you have to trench across the yard?
–
Not the way most people picture it. Low-voltage cable needs only a shallow slit in turf or a spot under mulch. Where we must cross a walk or drive, we look for an existing gap or bore under it rather than breaking concrete. The goal is a yard that looks untouched.
Are brass or copper fixtures worth the extra cost?
–
In many spots, yes. Solid brass and copper hold up to heat, sprinklers and the odd bump from a mower, and they age into a natural patina instead of peeling. Aluminum fixtures cost less and work well in protected areas. We mix materials where it makes sense and explain the tradeoff.
Do you service the systems you install?
–
Yes. We come back for service calls to re-aim fixtures, replace damaged parts, adjust timers and move lights as trees and beds change. Landscapes grow every year, so a little attention every so often keeps the lighting matched to the yard and looking the way it was designed.
Does landscape lighting help with security?
–
It helps. Lit walkways, side yards, gates and entries remove the dark spots people avoid being seen in, and they make the property easier to watch from inside or on a camera. Layered landscape light does this without the harsh glare of a single floodlight.

